Hey Is Good to Be Back Home Again

Inside: The easiest caption of how to sew a pillow encompass with piping! Even a beginner can do this!

If there is 1 fashion I've added a ton of color, character, and pattern to my habitation and saved some cash it's by taking on the challenge of educational activity myself to sew well enough to make my own home decor.

And since pillows are pretty much my favorite thing adjacent to mixing cloth patterns, I idea it was high time I show yous the easiest way to stitch a pillow cover with pipe.

I promise if you can sew together a straight line, you tin can practice this. Information technology is that piece of cake.

This post contains chapter links for your convenience. Click here to read my full disclosure.

I'm excited to be partnering with my go to abode decor fabric source, Cloth.com, to bring this easy-to-do sewing projection to the blog!

Adding piping around the edge of a pillow is a really fun way to either bring out one of the colors in your textile design or add a really fun pop of contrasting colour.

I used to create my piping slice in a completely divide step until I got smart and realized that there'southward a much easier (and faster) way to add piping. Non to mention doing information technology the manner I'1000 about to show you makes it so yous will never once again take that extra stitch line showing on your finish pillow cover. So frustrating, I know. You're welcome.

Here'southward what yous'll need to make a pillow embrace with piping:

• Fabric cutting to the size of your pillow form. (For example if your pillow course is 18 inches square, you'll need a front piece of fabric cut 18 inches square. The back piece will besides be 18 inches foursquare if you are making a zippered pillow cover, but if you are doing an envelope pillow cover your back piece will actually be 2 pieces.
• Cording the thickness of your pick and enough to go effectually your pillow
• Bias tape in the colour you desire your piping to be. Your bias tape needs to be wide plenty to wrap around your cording and still take nigh a 1/two inch seam.
• Thread in a matching color.
• Pillow insert in the size of your option
• (Optional) attachment

RELATED: Instructions for a zippered pillow cover or an envelope pillow comprehend.

(Y'all can find this really fun flamingo fabric that my little lady LOVES right here.)

How to stitch a pillow cover with pipage:

Step 1: Fold your bias record around your cording. Remember you want your bias tape to cover the cording and go out most a ane/two inch extra when the edges of the bias tape are lined upward.

Step 2: Grab the front piece of your pillow cover and place it in front of you, practiced side up.

Step 3: Starting in the center on the bottom edge, place the raw edge of your bias tape along the raw edge of your fabric. You want all three raw edges to match perfectly.

(Hint: investing in a rotary cutter and cutting mat to make perfectly measured and straight, make clean lines when cutting your fabric was the all-time affair I ever did.)

Footstep 4: Pivot it in place almost ii inches from the end.

On to the machine! You got this!

Yous volition desire to use your zipper foot for this and so that y'all tin can become every bit close every bit possible to the cording.

Step 5: Place your piece on your motorcar and lower your zipper foot right after your pin. (Y'all desire to leave most a 2-3 inch portion of your piping unsewn for now.

Step 6: Start sewing with a straight stitch right along the edge of the cording. Y'all can see the lump that your cording creates inside the bias tape. Sew together right along that line.

Step 7: When you get about an inch or two from the corner, end with your needle in your fabric and using your scissors, make well-nigh three-5 snips into the border of your bias tape. This will let you to plough the corner without screwing up the cording.

Pace viii: Go slow and go on and when you are about 1/2 inch from the end of that side, terminate with your needle downwards into your textile, lift your human foot, plow your textile and line up the piping on the adjacent side.

Then lower your foot, and go on down the next side.

(Yous'll repeat these steps for each corner.)

Pace 9: On the final side, stop sewing near 2-3 inches before you get dorsum to where you started.

Step 10: Line up the ends of your cording and cut them then that they barrel upwards to each other end to end. (You'll desire to peel back the bias record for this part.)

Stride 11: Fold the bias tape on the side you were just sewing effectually the cording as if yous were going to go on on.

Step 12: Take the first stop of the bias record and fold over the raw edge, simply a little. Then fold information technology over the piece with the cording already inside. (You tin come across the beginnings of your super pro looking seam.)

Pin it so it stays only like that.

Step 13: Take it dorsum to your car and outset your stitch a lilliputian before where you left off and go all the way to where you started!

You now have pipe all the way effectually the font piece of your pillow cover! Woo-hoo!

Okay. Now you need to make a decision. Are you going to get for it and make a zippered pillow encompass? Or are you going to make an envelope pillow cover?

Either way I have yous covered. You accept the piping on your forepart piece so now it is but a matter of following the steps in either my zippered pillow cover tutorial (that is then easy fifty-fifty beginners can do it!) or my easy envelope pillow encompass tutorial.

But a few tips before you head over to those steps…

Regardless of which type of pillow cover you are making, make sure that when yous are sewing the back piece on, the little pieces of bias tape that were created when you made your snips at the corner need to be laying apartment. If they aren't, they will exist poking through the forepart of your finished project, and your corners will exist no bueno.

If you are going for it and adding a zipper, be sure that when you are sewing the zipper on, you aren't going through the piping too. To make sure, lower the foot and and then lift the fabric and peek under to brand sure the pipe isn't pressed downward under the pes. In fact, terminate and bank check every little bit.

Also, afterward you've fastened your zipper and it is fourth dimension to employ your sew together ripper to undo the temporary zig-zag seam, make sure yous are merely ripping the zig-zag seam and non the seam holding your piping onto your front piece. (Yes I learned this the hard style 🙁  )

And once you are all washed, it's time to plow that baby right side out, add your pillow insert, and adore your handiwork!

My little lady was actually excited to come up home to her newly refreshed bed after her showtime day of school!

A big Give thanks Yous to Material.com for sponsoring this mail! As a long time customer information technology is a true accolade!

Can't get enough of sewing tutorials?

RELATED: HOW TO MAKE A ZIPPERED PILLOW COVER

RELATED: HOW TO MAKE AN ENVELOPE PILLOW COVER

kiddablee1984.blogspot.com

Source: https://www.heytherehome.com/sew-pillow-cover-with-piping-the-easy-way/

Share this post